| Delta/Rockwell 11 inch Metal Lathe specifications: Reprinted from the origional Rockwell manual |
| Capacity: Swing over bed: Swing over cross slide: Distance between centers (L-00 chuck mount): |
11-1/16" 6-7/16" 24" |
| Threads
and feeds: Quick change gearbox with 54 thread - t.p.i: Range of feed rates: Longitudinal: Cross: Leadscrew: |
4, 4-1/2, 5, 5-1/2, 5-3/4, 6, 6-1/2, 6-3/4,
7, 8, 9, 10, 11, 11-1/2, 12, 13, 13-1/2, 14, 16, 18, 20, 22,
23, 24, 26, 27, 28, 32, 36, 40, 44, 46, 48, 52, 54, 56, 64, 72,
80, 88, 92, 96, 104, 108, 112, 128, 144, 160, 176, 184, 192,
208, 216, 224 .0902 ~ .0016 .0301 ~ .0005 3/4" dia. Acme X 8 t.p.i |
| Spindle
and Headstock: Stepless speeds in direct drive: Stepless speeds with back gear Spindle dia. at roller bearings: Spindle center: Hole through spindle: Maximum 5-C collet capacity: |
220 ~ 1550rpm 45 ~ 250rpm 2-1/4" #2 Morse Taper 1-3/8" 1-1/16" |
| Bed: Length Width: Depth: Width of V-ways: |
49-1/4" 8-1/4" 5-7/8" 3/4" |
| Cross slide and compound rest: Length of saddle V-way: Width of bridge: Cross slide travel: Compound travel: Travel of cross slide with taper attachment locked: Travel of cross slide with taper unlocked: Maximum travel of tool by taper attachment: |
12-3/8" 4-1/4" 6-3/4" 2-1/4" 6-3/16" 9-1/16" 1-3/8: |
| Tool post: 9/16" X 1-7/16" opening takes standard tool holders for 5/16" bits |
|
| Tailstock: Ram diameter: Ram travel: Length of measured scale on ram: Center: Handwheel adjustable micrometer collar: |
1-3/8" 2-3/4" 3" #3 Morse taper .001" increments |
| Overall Dimensions: Cabinet and machine: Coolant pan: Drain hole: |
57-3/4" wide X 25-1/2" deep X 49-1/2" tall 1-3/16 tall X 22-1/2" deep X 56" wide 1/2" pipe plug |
| Shipping weight: | 880lbs. |